Clarke EX20 100H Heated Carpet Extractor (Machine Only, No Wand or Hose)
Clarke | SKU CLA-56105289
Categories: Carpet Extractors
EX20 100C & EX20 100H Portable Extractors
EX20™ portable extractors are the culmination of a major engineering and design initiative of Clarke that emanated from direct field input of cleaning technicians who used high performance portable extraction machines every day. The EX20 represents a dramatic step forward in implementing unique, productivity enhancing features that considered even the minutest detail. These features go a step beyond traditional componentry that is common to most extractors – pumps and vacuum motors – and take into account the most common annoyances expressed by cleaning technicians. For example, moving the solution tank filling site to a location where the inevitable spill does not come in contact with any electrical components or switches. No detail was overlooked.
Clarke EX20 100H heated portable extractor, machine only
A portable box extractor for carpet cleaning and restoration work, running at 100 psi with a 1,750 W in-line heater. Heat lifts soil and breaks down oily residue that cold water leaves behind, and it shortens drying time, which is usually what the customer actually notices.
Read before ordering: this part number is the machine only. It does not include a wand or hoses. If you need a working setup out of the box, order part 56105418 instead, which is the same machine supplied with a 12 inch stainless wand and 15 foot hoses.
Pump pressure: 100 psi
Heater: 1,750 W, two-cord
Supplied: machine only, no wand or hoses
Weight: 87 lb (39.5 kg)
Dimensions: 40.5 x 21 x 42 in
Part number: 56105289
| Brand | Clarke |
EX20™ portable extractors are the culmination of a major engineering and design initiative of Clarke that emanated from direct field input of cleaning technicians who used high performance portable extraction machines every day. The EX20 represents a dramatic step forward in implementing unique, productivity enhancing features that considered even the minutest detail. These features go a step beyond traditional componentry that is common to most extractors – pumps and vacuum motors – and take into account the most common annoyances expressed by cleaning technicians. For example, moving the solution tank filling site to a location where the inevitable spill does not come in contact with any electrical components or switches. No detail was overlooked.
- Ergonomic design allows for easier loading and transport.
- Unique transport handle design makes maneuverability, and control around facilities a breeze.
- Handle on top of the tank assists in lifting, loading/unloading and acts as a vacuum hose guidance system.
- Oversized, rubber grip rear wheels.
- Two front panel roller wheels assist in loading and unloading from transport vehicle.
- Extension cord wraps to protect extension cords and make maneuverability and transport through facility easier.
- Easy-fill solution tank access port.
- Sloped recovery tank design.
| Brand | Clarke |
| Dimensions | 40.5 in x 21 in x 42 in |
| Weight | 87 lbs |
| Pump | 100 psi |
| Collection/Serie | EX20 100C & 100H |
| Cord | 100C: Single / 100H: Dual |
Low moisture / environmental footprint reduction system Less water combined with higher heat means faster drying, less chance of soil wicking from pad or shrinkage High heat system reduces chemical usage in cleaning and reduces the need for chemical sanitizing of surfaces.