Clarke EX20 100C Carpet Extractor (Machine Only, No Wand or Hose)
Clarke | SKU CLA-56105288
Categories: Carpet Extractors
EX20 100C & EX20 100H Portable Extractors
EX20™ portable extractors are the culmination of a major engineering and design initiative of Clarke that emanated from direct field input of cleaning technicians who used high performance portable extraction machines every day. The EX20 represents a dramatic step forward in implementing unique, productivity enhancing features that considered even the minutest detail. These features go a step beyond traditional componentry that is common to most extractors – pumps and vacuum motors – and take into account the most common annoyances expressed by cleaning technicians. For example, moving the solution tank filling site to a location where the inevitable spill does not come in contact with any electrical components or switches. No detail was overlooked.
Clarke EX20 100C portable extractor, machine only
A portable box extractor for carpet cleaning and restoration work, running at 100 psi. Non-heated.
Read before ordering: this part number is the machine only. It does not include a wand or hoses. If you need a working setup out of the box, order part 56105416 instead, which is the same machine supplied with a 12 inch stainless wand and 15 foot solution and vacuum hoses. The machine-only version makes sense when you already have wands and hoses from an existing fleet.
The EX20 was designed from direct field input, and the detail work shows: the solution tank fill point was deliberately moved away from electrical components and switches so the inevitable spill does not reach them.
For heated extraction, the equivalent is the EX20 100H (part 56105289).
Pump pressure: 100 psi
Heater: none
Supplied: machine only, no wand or hoses
Weight: 87 lb (39.5 kg)
Dimensions: 40.5 x 21 x 42 in
Part number: 56105288
| Brand | Clarke |
EX20™ portable extractors are the culmination of a major engineering and design initiative of Clarke that emanated from direct field input of cleaning technicians who used high performance portable extraction machines every day. The EX20 represents a dramatic step forward in implementing unique, productivity enhancing features that considered even the minutest detail. These features go a step beyond traditional componentry that is common to most extractors – pumps and vacuum motors – and take into account the most common annoyances expressed by cleaning technicians. For example, moving the solution tank filling site to a location where the inevitable spill does not come in contact with any electrical components or switches. No detail was overlooked.
- Ergonomic design allows for easier loading and transport.
- Unique transport handle design makes maneuverability, and control around facilities a breeze.
- Handle on top of the tank assists in lifting, loading/unloading and acts as a vacuum hose guidance system.
- Oversized, rubber grip rear wheels.
- Two front panel roller wheels assist in loading and unloading from transport vehicle.
- Extension cord wraps to protect extension cords and make maneuverability and transport through facility easier.
- Easy-fill solution tank access port.
- Sloped recovery tank design.
| Brand | Clarke |
| Dimensions | 40.5 in x 21 in x 42 in |
| Weight | 87 lbs |
| Pump | 100 psi |
| Collection/Serie | EX20 100C & 100H |
| Cord | 100C: Single / 100H: Dual |
Low moisture / environmental footprint reduction system Less water combined with higher heat means faster drying, less chance of soil wicking from pad or shrinkage High heat system reduces chemical usage in cleaning and reduces the need for chemical sanitizing of surfaces.